Skip to main content
Indiana Geological and Water Survey
Indiana University
Outreach

Water Resources Overview

Water constantly moves above and below the Earth's surface in a process known as the hydrologic (water) cycle. Areas of land that drain water to a common outlet are called watersheds. Watersheds gain water through precipitation and lose water through infiltration, surface runoff, and evapotranspiration. The sum of these processes is called a water balance.

  • Precipitation is water that reaches Earth's surface in the form of rain, sleet, snow, or hail. Precipitation travels from the atmosphere to the ground and is the primary input to a watershed system.
  • Infiltration is the movement of rainwater and snowmelt into the ground through soil pore spaces or rock fractures. Water can remain within the shallow soil and be taken up by plants, percolate deeper into groundwater aquifers, or move toward the surface to discharge.
  • Surface runoff is the movement of rainwater and snowmelt over the ground into receiving water bodies. When the absorptive capacity of the ground is exceeded, excess water flows overland as runoff. The flow of surface runoff is largely determined by the topography of a watershed.
  • Evapotranspiration is the conversion of liquid water to water vapor (gas) through evaporation and transpiration. Evaporation occurs when water on or within the ground absorbs energy and transforms into vapor, while transpiration is the process by which plants release water vapor through their leaves.

Watersheds include streams and lakes on the surface, as well as underground aquifers and groundwater that contribute to those streams. The amount of water available in a watershed–and therefore the amount of water that is available to be used in everyday life–depends upon an area's geology and climate. 

Aquifers

Groundwater is water present in the subsurface within soil and rock pore spaces and fractures. The amount of water that infiltrates soil and rock is dependent upon the amount of precipitation and base flow, as well as the type of geologic material through which the water travels. Throughout the glacial till plains of central Indiana, for example, the soil is loamy and absorbs water readily; in the northeast, glacial lakes left behind dense clay, resulting in soils with a lower infiltration rate. Material composed of particles of uniform size, such as outwash sand or sandstone rock, tends to hold more water than materials of different sizes because the uniform grains do not fit tightly together, allowing more open space to hold water.

When water infiltrates the subsurface, it travels through air-filled pores in the unsaturated zone. Water slowly percolates through the pore spaces at increasing depths until they become saturated; the depth at which the ground becomes saturated is called the water table. Below the water table, water flows through a saturated zone called an aquifer, which is a permeable body of rock or sediment that contains usable amounts of groundwater. The water table and underlying aquifer can be anywhere from a few feet to hundreds of feet below the ground surface.

Indiana has many aquifers that occur in varying thicknesses and distributions. Several are within isolated lenses of unconsolidated sand and gravel, primarily in glaciated regions of northern and central Indiana. Bedrock aquifers are an important source of water in central and southern Indiana, largely consisting of carbonate and sandstone rock. In areas where bedrock voids are not sufficiently interconnected to yield useful amounts of groundwater, reservoirs (such as Monroe Lake and Patoka Lake) are used for water supply. Individual watersheds can draw groundwater from a variety of aquifer types.

Groundwater-surface water interaction

Groundwater interacts with surface water bodies, like streams or wetlands, in most geologic settings. In areas where the water table meets the ground surface, water can discharge as a spring or seep. Surface water bodies can also gain or lose water from an aquifer depending on seasonal variations. In areas with karst topography, surface water can flow directly into the subsurface via sinkholes and swallow holes.

Groundwater can be artificially brought to the surface through wells. More than 300,000 water wells have been drilled in Indiana, and many Hoosier residents and municipalities obtain their water from such wells. The use of water wells can affect both groundwater and surface water levels if groundwater is withdrawn faster than it can be replenished by infiltration or stream input. When groundwater is overdrawn, the water level lowers and a cone of depression forms around the well. Wells in shallow aquifers can reduce the surface water supply by capturing some of the groundwater flow that would have otherwise discharged into a surface water body. In deeper, confined aquifers, the cone of depression can spread over a much larger area and decrease overall pressure within the aquifer. The impact of excessive pumping on a water table level can last for days or decades, depending on the unique geologic and hydrologic conditions of the aquifer.

Groundwater-surface water interaction is not only an important part of the hydrologic cycle, but the exchange of water and chemicals can also allow contaminants to spread. Natural contaminants, such as manganese and sulfate, can be dissolved from rock and found in high concentrations in groundwater. Pesticides, fertilizer, underground storage tanks, urban runoff, and animal waste runoff are some of the potential sources for human-induced groundwater contamination.